Site assessment and camera placement
A walk-through of the premises to map entry points, cash points, stock areas and existing blind spots, before any camera is positioned — not a fixed package sold regardless of layout.
See every corner of your business, day or night, from anywhere
Site assessment and camera placement
Dome, bullet and PTZ camera selection
Resolution and night-vision matched to the site
Zinen Technologies installs and maintains CCTV and security camera systems for shops, offices, warehouses, estates and homes across Nairobi and the wider region. A system is only as good as the design behind it, so every job starts with a site assessment: walking the premises to identify entry points, cash points, stock areas and existing blind spots before a single camera is mounted, rather than selling a fixed package of cameras regardless of the layout.
We work with dome, bullet and PTZ (pan-tilt-zoom) cameras depending on the location — domes for discreet indoor coverage, bullets for visible outdoor deterrence, and PTZ where an operator needs to actively follow movement across a large yard or parking area. Every camera is specified for the resolution and night-vision performance the site actually needs, from basic 2MP coverage of a stockroom to 4K and above at a till point or gate where faces and number plates must be identifiable.
Recording runs on an NVR (for IP cameras) or DVR (for analogue/HD-over-coax cameras), with storage sized to the retention period the business needs — commonly 30 days, longer for sites with higher risk or insurance requirements. Power and cabling are run properly the first time, usually over PoE (Power over Ethernet) so cameras get power and data on a single cable, with clean routing and proper termination rather than loose wires taped along a wall. Every installation includes remote viewing setup on your phone, and ongoing maintenance keeps footage actually available when an incident happens — which is the point of the whole system.
CCTV & Security Camera Installation covers the full decision a Kenyan business actually has to make — camera type and resolution, NVR vs DVR, local vs cloud storage, PoE cabling, access-control integration and ongoing maintenance — not a fixed package sold the same way to every site.
The modules below are based on the underlying Zinen system design and show how the solution can be organized for day-to-day operations.
A walk-through of the premises to map entry points, cash points, stock areas and existing blind spots, before any camera is positioned — not a fixed package sold regardless of layout.
Discreet dome cameras for indoor coverage, visible bullet cameras for outdoor deterrence, and pan-tilt-zoom cameras where an operator needs to actively follow movement across a yard or parking area.
Cameras specified from basic 2MP coverage up to 4K and above, with infrared or starlight night-vision performance matched to how critical face or number-plate identification is at that point.
Network Video Recorders for IP cameras or Digital Video Recorders for analogue/HD-over-coax systems, sized and configured for the camera count and resolution on site.
Local hard-drive storage sized for the retention period the business needs (commonly 30 days), with options for longer retention where risk or insurance requirements demand it.
Optional cloud backup of key camera feeds alongside local NVR/DVR storage, so footage survives even if a recorder is damaged, stolen or tampered with on-site.
Power over Ethernet (PoE) cabling that carries both power and data on a single cable per camera, routed and terminated properly rather than left as loose, exposed wiring.
Live and recorded footage accessible from a mobile app from anywhere, with multi-user access so owners, managers and security staff can each check in independently.
Monitor several branches, warehouses or sites from a single account or app, useful for owners running more than one location.
Link CCTV coverage to gate, door or turnstile access-control systems so an entry event and the footage of who triggered it sit together, not in two separate systems.
Configure motion zones and smart alerts (line-crossing, loitering, intrusion) so relevant staff are notified of activity instead of having to watch footage continuously.
Higher-resolution cameras and lens selection at gates, tills and entrances specifically chosen so number plates and faces are identifiable when it matters, not just "somewhere in frame".
Professional mounting and cable routing that keeps wiring concealed and protected from weather and tampering, rather than a visibly rushed job.
A short handover session so whoever will use the system day to day knows how to review footage, export clips and manage user access, not just how to switch it on.
Scheduled checks on camera health, storage capacity and recording status, catching failed cameras or full hard drives before they leave a blind spot you don't know about.
Export clips in a usable format when footage is needed for police reports, insurance claims or internal investigations, with a clear chain of what was exported and when.
These images show the type of environment, people, assets or workflow the system is designed to support. The software is tailored around the operational records and processes described on this page.
CCTV security camera mounted on a building for surveillance
Network server rack with cables and hardware in a data centre
Restricted-access gate used to control entry to a property
Zinen Technologies is based at Bazaar Plaza, Moi Avenue, Nairobi. Every CCTV & Security Camera Installation deployment is configured, tested and supported by a local team who understands how businesses in Kenya operate — including M-Pesa payments and local compliance requirements.
Speak to our Nairobi teamPeople often search for
It depends on the location. Dome cameras suit discreet indoor coverage, bullet cameras are a visible outdoor deterrent, and PTZ (pan-tilt-zoom) cameras suit large yards or parking areas where an operator needs to actively follow movement. Our site assessment recommends the right mix rather than a one-size package.
An NVR (Network Video Recorder) is used with IP cameras and typically gives better image quality and more flexible placement since data runs over network cable. A DVR (Digital Video Recorder) works with analogue or HD-over-coax cameras and can be a lower-cost option for simpler sites. We recommend based on your cameras and budget.
Yes, remote viewing is set up as part of every installation so you can check live and recorded footage from anywhere, with separate logins for different staff if needed.
It depends on the layout, but our team does a site assessment first and recommends coverage based on actual blind spots and entry/cash points, not a fixed number regardless of your premises.
Most sites use local NVR/DVR storage for day-to-day review, with optional cloud backup of key feeds so footage isn't lost if the recorder itself is damaged, stolen or tampered with.
We typically run PoE (Power over Ethernet) cabling, which carries both power and video data on a single cable per camera, properly routed and terminated rather than left exposed. This keeps installation clean and the cameras reliable.
Yes, camera coverage can be integrated with gate, door or turnstile access-control systems so an entry event and the footage of who triggered it are tied together.
Our maintenance and support contracts include scheduled checks on camera health, storage capacity and recording status, so failures and full hard drives are caught and fixed before they leave you without coverage.
Cost depends on the number of cameras, resolution and night-vision specification, cabling distance and complexity, NVR/DVR and storage capacity, and whether cloud backup or access-control integration is included. Our site assessment gives you an itemised quote rather than a flat package price.
Yes, multi-site setups can be monitored from a single account or app, which is useful for owners running more than one branch, shop or warehouse.
Book a free demo and we'll show you exactly how it fits your workflow — no obligation.